AI4Science 论文速递

Fiber reinforcement and polymer matrix respond differently to manufacturing conditions due to mismatch in coefficient of thermal expansion and matrix shrinkage during curing of thermosets. These heterogeneities generate residual stresses over multiple length scales, whose partial release leads to process-induced deformation (PID), requiring accurate prediction and mitigation via optimized non-isothermal cure cycles. This study considers a unidirectional AS4 carbon fiber/amine bi-functional epoxy prepreg and models PID using a two-mechanism framework that accounts for thermal expansion/shrinkage and cure shrinkage. The model is validated against manufacturing trials to identify initial and boundary conditions, then used to generate PID responses for a diverse set of non-isothermal cure cycles (time-temperature profiles). Building on this physics-based foundation, we develop a data-driven surrogate based on Deep Operator Networks (DeepONets). A DeepONet is trained on a dataset combining high-fidelity simulations with targeted experimental measurements of PID. We extend this to a Feature-wise Linear Modulation (FiLM) DeepONet, where branch-network features are modulated by external parameters, including the initial degree of cure, enabling prediction of time histories of degree of cure, viscosity, and deformation. Because experimental data are available only at limited time instances (for example, final deformation), we use transfer learning: simulation-trained trunk and branch networks are fixed and only the final layer is updated using measured final deformation. Finally, we augment the framework with Ensemble Kalman Inversion (EKI) to quantify uncertainty under experimental conditions and to support optimization of cure schedules for reduced PID in composites.

Fiber reinforcement and polymer matrix respond differently to manufacturing conditions due to mismatch in coefficient of thermal expansion and matrix shrinkage during curing of thermosets.

We present H-RAG, our submission to SemEval-2026 Task 8 (MTRAGEval), addressing both Task A (Retrieval) and Task C (Generation with Retrieved Passages). Task A evaluates standalone retrieval quality, while Task C assesses end-to-end retrieval-augmented generation (RAG) in multi-turn conversational settings, requiring both accurate answer generation and faithful grounding in retrieved evidence. Our approach implements a hierarchical parent-child RAG pipeline that separates fine-grained child-level retrieval from parent-level context reconstruction during generation. Documents are segmented into overlapping sentence-based child chunks, while full documents are preserved as parent units to provide coherent context. Retrieval combines hybrid dense-sparse search, tunable weighting, and embedding-based similarity rescoring over child chunks. Retrieved evidence is aggregated at the parent level and supplied to an instruction-tuned language model for response generation. H-RAG achieves an nDCG@5 score of 0.4271 on Task A and a harmonic mean score of 0.3241 on Task C (RB_agg: 0.2488, RL_F: 0.2703, RB_llm: 0.6508), underscoring the importance of retrieval configuration and parent-level aggregation in multi-turn RAG performance.

We present H-RAG, our submission to SemEval-2026 Task 8 (MTRAGEval), addressing both Task A (Retrieval) and Task C (Generation with Retrieved Passages).

Customer-service question answering (QA) systems increasingly rely on conversational language understanding. While Large Language Models (LLMs) achieve strong performance, their high computational cost and deployment constraints limit practical use in resource-constrained environments. Small Language Models (SLMs) provide a more efficient alternative, yet their effectiveness for multi-turn customer-service QA remains underexplored, particularly in scenarios requiring dialogue continuity and contextual understanding. This study investigates instruction-tuned SLMs for context-summarized multi-turn customer-service QA, using a history summarization strategy to preserve essential conversational state. We also introduce a conversation stage-based qualitative analysis to evaluate model behavior across different phases of customer-service interactions. Nine instruction-tuned low-parameterized SLMs are evaluated against three commercial LLMs using lexical and semantic similarity metrics alongside qualitative assessments, including human evaluation and LLM-as-a-judge methods. Results show notable variation across SLMs, with some models demonstrating near-LLM performance, while others struggle to maintain dialogue continuity and contextual alignment. These findings highlight both the potential and current limitations of low-parameterized language models for real-world customer-service QA systems.

Customer-service question answering (QA) systems increasingly rely on conversational language understanding.

Safety-aligned large language models rely on RLHF and instruction tuning to refuse harmful requests, yet the internal mechanisms implementing safety behavior remain poorly understood. We introduce the Attention Redistribution Attack (ARA), a white-box adversarial attack that identifies safety-critical attention heads and crafts nonsemantic adversarial tokens that redirect attention away from safety-relevant positions. Unlike prior jailbreak methods operating at the semantic or output-logit level, ARA targets the geometry of softmax attention on the probability simplex using Gumbel-softmax optimization over targeted heads. Across LLaMA-3-8B-Instruct, Mistral-7B-Instruct-v0.1, and Gemma-2-9B-it, ARA bypasses safety alignment with as few as 5 tokens and 500 optimization steps, achieving 36% ASR on Mistral-7B and 30% on LLaMA-3 against 200 HarmBench prompts, while Gemma-2 remains at 1%. Our principal mechanistic finding is a dissociation between ablation and redistribution: zeroing out the top-ranked safety heads produces at most 1 flip among 39 to 50 baseline refusals, while ARA targeting the corresponding safety-heavy layers flips 72/200 prompts on Mistral-7B and 60/200 on LLaMA-3. This suggests that safety is not localized in these heads as removable components, but emerges from the attention routing they perform. Removing a head allows compensation through the residual stream, while redirecting its attention propagates a corrupted signal downstream.

Safety-aligned large language models rely on RLHF and instruction tuning to refuse harmful requests, yet the internal mechanisms implementing safety behavior remain poorly understood.

Proteins are shaped by gradual evolution under biophysical and functional constraints. Protein language models learn rich evolutionary constraints from large-scale sequences, and discrete diffusion-based protein language models~(\eg, DPLMs) are promising for both understanding and generation. However, existing DPLMs typically rely on masking-based absorbing diffusion that contradicts a simple biological intuition: proteins evolve through accumulated edits, not by emerging from masks. Consequently, these frameworks lack explicit pretraining objectives for substitution and insertion/deletion (indel) operations, limiting both optimization-style post-editing and flexible guided generation. To address these limitations, we present DPLM-Evo, an evolutionary discrete diffusion framework that explicitly predicts substitution, insertion, and deletion operations during denoising. DPLM-Evo decouples an upsampled-length latent alignment space from the variable-length observed sequence space, which makes indel-aware generation tractable and enables adaptive scaffold growth throughout the process with negligible computational overhead. To better align substitutions with real evolution, we further introduce a contextualized evolutionary noising kernel that produces biologically informed, context-dependent mutation patterns. Across tasks, DPLM-Evo improves sequence understanding and achieves state-of-the-art mutation effect prediction performance on ProteinGym in the single-sequence setting. It also enables variable-length simulated evolution, and post-editing/optimization of existing proteins via explicit edit trajectories.

Proteins are shaped by gradual evolution under biophysical and functional constraints.

In this article, we introduce ViLegalNLI, the first large-scale Vietnamese Natural Language Inference (NLI) dataset specifically constructed for the legal domain. The dataset consists of 42,012 premise-hypothesis pairs derived from official statutory documents and annotated with binary inference labels (Entailment and Non-entailment). It covers multiple legal domains and reflects realistic legal reasoning scenarios characterized by structured logic, conditional clauses, and domain-specific terminology. To construct ViLegalNLI, we propose a semi-automatic data generation framework that integrates large language models for controlled hypothesis generation and systematic quality validation procedures. The framework incorporates artifact mitigation strategies and cross-model validation to improve annotation reliability and ensure legal consistency. The resulting dataset captures diverse reasoning patterns, including paraphrasing, logical implication, and legally invalid inferences, thereby providing a comprehensive benchmark for Vietnamese legal inference tasks. We conduct extensive experiments on the ViLegalNLI using multilingual models, Vietnamese-specific pretrained language models, and instruction-tuned large language models. The results show that few-shot LLM configurations consistently achieve superior performance, while performance is significantly influenced by hypothesis length, lexical overlap, and reasoning complexity. Cross-domain evaluations further reveal the challenges of generalizing legal inference across distinct legal fields. Overall, ViLegalNLI establishes a foundational benchmark for Vietnamese legal NLI and supports future research in legal reasoning, statutory text understanding, and the development of reliable AI systems for legal analysis and decision support. The dataset is publicly available for research purposes.

In this article, we introduce ViLegalNLI, the first large-scale Vietnamese Natural Language Inference (NLI) dataset specifically constructed for the legal domain.

AI coding assistants have proliferated rapidly, yet structured pedagogical frameworks for learning these tools remain scarce. Developers face a gap between tool documentation and practical mastery, relying on fragmented resources such as blog posts, video tutorials, and trial-and-error. We present cc-self-train, a modular interactive curriculum for learning Claude Code, an agentic AI coding tool, through hands-on project construction. The system introduces five contributions: (1) a persona progression model that adapts instructor tone across four stages (Guide, Collaborator, Peer, Launcher), operationalizing Gradual Release of Responsibility for AI-mediated instruction; (2) an adaptive learning system that observes engagement quality through hook-based heuristics and adjusts scaffolding at two timescales, using streak detection for mid-module intervention and aggregate metrics for module-boundary persona changes; (3) a cross-domain unified curriculum in which five distinct project domains share identical feature sequencing, enabling transfer learning; (4) a step-pacing mechanism with explicit pause primitives to manage information overload in an AI-as-instructor context; and (5) an auto-updating curriculum design in which the onboarding agent detects upstream tool changes and updates teaching materials before instruction begins. A parametrized test suite enforces structural consistency as a proxy for pedagogical invariants across all 50 modules. A pilot evaluation with 27 participants shows statistically significant reported self-efficacy gains across all 10 assessed skill areas (p < 0.001), with the largest effects on advanced features such as hooks and custom skills. We discuss implications for the design of auto-updating educational systems.

AI coding assistants have proliferated rapidly, yet structured pedagogical frameworks for learning these tools remain scarce.

The Forward-Forward (FF) algorithm presents a compelling, bio-inspired alternative to backpropagation. However, while efficient in training, it has a computationally prohibitive inference process that requires a separate forward pass for every class that is evaluated. In this work, we introduce the Hyperspherical Forward-Forward (HFF), a novel reformulation that resolves this critical bottleneck. Our core innovation is to reframe the local objective of each layer from a binary goodness-of-fit task to a direct multi-class classification problem within a hyperspherical feature space. We achieve this by learning a set of class-specific, unit-norm prototypes that act as geometric anchors and implicit negatives. This architectural innovation preserves the benefits of local training while enabling weight update and inference in a single forward pass, making it >40x faster than the original FF algorithm. Our method is simple to implement, scales effectively to modern convolutional architectures, and achieves superior accuracy on standard image classification benchmarks, closing the gap with backpropagation. Most notably, we are among the first greedy local-learning methods to report over 25% top-1 accuracy on ImageNet-1k, and 65.96% with transfer learning.

The Forward-Forward (FF) algorithm presents a compelling, bio-inspired alternative to backpropagation.

Instruction following is a critical ability for Large Language Models to perform downstream tasks. The standard approach to instruction tuning has relied on a specific phase of supervised fine-tuning over curated instruction datasets, optionally complemented with an alignment step over human preferences. Recent work has shown the potential of in-context learning (ICL) alternatives to guide base models towards instruction following. This type of approach is particularly relevant to circumvent the notable efforts and resources needed for supervised instruction tuning. In this work, we evaluate the viability of ICL for instruction following in scenarios where it is particularly relevant, i.e., languages other than English and across model sizes. Our results show that these scenarios result in downgraded ICL instruction following performance. We further show that applying Direct Preference Optimisation over base models can partially improve baseline results, although alternatives to current ICL instruction following will be needed to bridge the gap with larger English-centric language models.

Instruction following is a critical ability for Large Language Models to perform downstream tasks.

Exponential growth in the scale of modern foundation models has led to the widespread adoption of Low-Rank Adaptation (LoRA) as a parameter-efficient fine-tuning technique. However, standard LoRA implementations disregard the varying intrinsic dimensionality of model layers and enforce a uniform rank, leading to parameter redundancy. We propose Post-Optimization Adaptive Rank Allocation (PARA), a data-free compression method for LoRA that integrates seamlessly into existing fine-tuning pipelines. PARA leverages Singular Value Decomposition to prune LoRA ranks using a global threshold over singular values across all layers. This results in non-uniform rank allocation based on layer-wise spectral importance. As a post-hoc method, PARA circumvents the training modifications and resulting instabilities that dynamic architectures typically incur. We empirically demonstrate that PARA reduces parameter count by 75-90\% while preserving the predictive performance of the original, uncompressed LoRA across multiple vision and language benchmarks. Code will be published upon acceptance.

Exponential growth in the scale of modern foundation models has led to the widespread adoption of Low-Rank Adaptation (LoRA) as a parameter-efficient fine-tuning technique.

Inertial Confinement Fusion (ICF) holds transformative promise for sustainable, near-limitless clean energy, yet remains constrained by prohibitively high costs and limited experimental opportunities. This paper presents Human-in-the-Loop Meta Bayesian Optimization (HL-MBO), a framework that integrates expert knowledge with few-shot, uncertainty-aware machine learning to accelerate discovery in data-scarce, high-stakes scientific domains. HL-MBO introduces a meta-learned surrogate model with an expert-informed acquisition function to recommend candidate experiments. To foster trust and enable informed decisions, HL-MBO also provides interpretable explanations of its suggestions. We show HL-MBO outperforms current BO methods on ICF energy yield optimization, as well as benchmarks in molecular optimization and critical temperature maximization for superconducting materials.

Inertial Confinement Fusion (ICF) holds transformative promise for sustainable, near-limitless clean energy, yet remains constrained by prohibitively high costs and limited experimental opportunities.

Graph few-shot learning, which focuses on effectively learning from only a small number of labeled nodes to quickly adapt to new tasks, has garnered significant research attention. Despite recent advances in graph few-shot learning that have demonstrated promising performance, existing methods still suffer from several key limitations. First, during the meta-training phase, these methods typically perform node representation learning in Euclidean space, which often fails to capture the inherently hierarchical structure existing in real-world graph data. Second, during the meta-testing phase, they usually fit an empirical target distribution derived from only a few support samples, even when this distribution significantly deviates from the true underlying distribution. To address these issues, we propose IMPRESS, a novel framework that IMproves graPh few-shot learning with hypeRbolic spacE and denoiSing diffuSion. Specifically, our model learns node representations in a hyperbolic space and enriches the support distribution through denoising diffusion mechanisms. Theoretically, IMPRESS achieves a tighter generalization bound. Empirically, IMPRESS consistently outperforms competitive baselines across multiple benchmark datasets.

Graph few-shot learning, which focuses on effectively learning from only a small number of labeled nodes to quickly adapt to new tasks, has garnered significant research attention.

Building efficient and effective generative models for neural network weights has been a research focus of significant interest that faces challenges posed by the high-dimensional weight spaces of modern neural networks and their symmetries. Several prior generative models are limited to generating partial neural network weights, particularly for larger models, such as ResNet and ViT. Those that do generate complete weights struggle with generation speed or require finetuning of the generated models. In this work, we present DeepWeightFlow, a Flow Matching model that operates directly in weight space to generate diverse and high-accuracy neural network weights for a variety of architectures, neural network sizes, and data modalities. The neural networks generated by DeepWeightFlow do not require fine-tuning to perform well and can scale to large networks. We apply Git Re-Basin and TransFusion for neural network canonicalization in the context of generative weight models to account for the impact of neural network permutation symmetries and to improve generation efficiency for larger model sizes. The generated networks excel at transfer learning, and ensembles of hundreds of neural networks can be generated in minutes, far exceeding the efficiency of diffusion-based methods. DeepWeightFlow models pave the way for more efficient and scalable generation of diverse sets of neural networks.

Building efficient and effective generative models for neural network weights has been a research focus of significant interest that faces challenges posed by the high-dimensional weight spaces of modern neural networks and their symmetries.

Parameter-efficient fine-tuning (PEFT) methods face a tradeoff between adapter size and expressivity: ultra-low-parameter adapters are confined to fixed low-rank subspaces, capping performance even with extended training. We propose BoostLoRA, a gradient-boosting framework that overcomes this limit by iteratively training and merging minimal adapters on the examples the current model gets wrong. A ROTATE SVD basis strategy assigns each round to an orthogonal subspace, so cumulative effective rank grows linearly with the number of rounds while each adapter remains ultra-low-rank. After merging, adapters are discarded, leaving zero inference overhead. On Qwen2.5-3B, BoostLoRA reaches 89.1% on GSM8K and 68.8% on MATH-500, surpassing both the best single-shot ultra-low parameter adapter (TinyLoRA) and full fine-tuning; on code generation it reaches 57.2% on MBPP and 80.4% on HumanEval while full fine-tuning drops below the zero-shot baseline. We also demonstrate cross-architecture transfer on protein binding classification with ESM2-650M and cross-entropy training. BoostLoRA is, to our knowledge, the first PEFT method whose effective rank grows with training, separating per-round parameter cost from total representational capacity.

Parameter-efficient fine-tuning (PEFT) methods face a tradeoff between adapter size and expressivity: ultra-low-parameter adapters are confined to fixed low-rank subspaces, capping performance even with extended training.

Learning rate scheduling has evolved from the single global fixed rate of early SGD to sophisticated layer-wise adaptive strategies. We systematize this evolution into five generations: (Gen1) global fixed learning rates, (Gen2) global scheduling, (Gen3) parameter-level adaptation, (Gen4) layer-level differentiation, and (Gen5) joint layer-time scheduling. We trace the fundamental motivation behind each transition, showing how the shift from one-size-fits-all to tailoring by layer and time addresses the impossible trinity of transfer learning: lower layers require small updates to preserve general knowledge while higher layers need large updates to adapt to new tasks. Building on this taxonomy, we propose Discriminative Adaptive Layer Scaling (DALS), a unified framework that integrates phase-adaptive cosine scheduling, depth-aware Grokfast gradient filtering, and LARS-style trust ratios into a single coherent optimizer. We benchmark 18 strategies including three DALS variants across all five generations on five datasets: synthetic, CIFAR-10 (from scratch), RTE, TREC-6, and IMDb (fine-tuning). On synthetic, DALS achieves the best accuracy at 98.0%, while DALS-Fast reaches 90% in just 3 epochs. The cross-dataset analysis reveals striking regime-dependent patterns -- no single strategy wins across all regimes. Critically, STLR+Discriminative, the ULMFiT champion, catastrophically fails on from-scratch tasks (43.6% on TREC-6 from scratch vs. 96.8% with RAdam), confirming that directional decay biases are harmful without pretrained features. DALS avoids either extreme, achieving the best synthetic result while maintaining competitive fine-tuning performance.

Learning rate scheduling has evolved from the single global fixed rate of early SGD to sophisticated layer-wise adaptive strategies.

When instructed to underperform on multiple-choice evaluations, do language models engage with question content or fall back on positional shortcuts? We map the boundary between these regimes using a six-condition adversarial instruction-specificity gradient administered to two instruction-tuned LLMs (Llama-3-8B and Llama-3.1-8B) on 2,000 MMLU-Pro items. Distributional screening (response-position entropy) and an independent content-engagement criterion (difficulty-accuracy correlation) jointly characterise each condition. The gradient reveals three regimes rather than a monotonic transition. Vague adversarial instructions produce moderate accuracy reduction with preserved content engagement. Standard sandbagging and capability-imitation instructions produce positional entropy collapse with partial content engagement. A two-step answer-aware avoidance instruction produces extreme positional collapse, with near-total concentration on a single response position (99.9% and 87.4%) and no measurable content sensitivity. This was the only multi-step instruction tested, and it produced the most extreme shortcut. The attractor position matches each model's content-absent null-prompt default. The effect replicates across both models and four academic domains. Distributional collapse and content engagement can co-occur (50% concordance between screening criteria), indicating that entropy-based screening and difficulty-based content assessment capture partially independent dimensions of response validity. Results suggest that instruction complexity can determine whether adversarial compliance uses content-aware or content-blind mechanisms in small instruction-tuned LLMs under greedy decoding.

When instructed to underperform on multiple-choice evaluations, do language models engage with question content or fall back on positional shortcuts?

Tool-calling agents are evaluated on tool selection, parameter accuracy, and scope recognition, yet LLM trajectory assessments remain inherently post-hoc. Disconnected from the active execution loop, such assessments identify errors that are usually addressed through prompt-tuning or retraining, and fundamentally cannot course-correct the agent in real time. To close this gap, we move evaluation into the execution loop at inference time: a specialized reviewer agent evaluates provisional tool calls prior to execution, shifting the paradigm from post-hoc recovery to proactive evaluation and error mitigation. In practice, this architecture establishes a clear separation of concerns between the primary execution agent and a secondary review agent. As with any multi-agent system, the reviewer can introduce new errors while correcting others, yet no prior work to our knowledge has systematically measured this tradeoff. To quantify this tradeoff, we introduce Helpfulness-Harmfulness metrics: helpfulness measures the percentage of base agent errors that feedback corrects; harmfulness measures the percentage of correct responses that feedback degrades. These metrics directly inform reviewer design by revealing whether a given model or prompt provides net positive value. We evaluate our approach on BFCL (single-turn) and Tau2-Bench (multi-turn stateful scenarios), achieving +5.5% on irrelevance detection and +7.1% on multi-turn tasks. Our metrics reveal that reviewer model choice is critical: the reasoning model o3-mini achieves a 3:1 benefit-to-risk ratio versus 2.1:1 for GPT-4o. Automated prompt optimization via GEPA provides an additional +1.5-2.8%. Together, these results demonstrate a core advantage of separating execution and review: the reviewer can be systematically improved through model selection and prompt optimization, without retraining the base agent.

Tool-calling agents are evaluated on tool selection, parameter accuracy, and scope recognition, yet LLM trajectory assessments remain inherently post-hoc.

Aspect-based Sentiment Analysis (ABSA) extracts fine-grained opinions toward specific aspects within text but remains largely English-focused despite major advances in transformer-based and instruction-tuned models. This work presents a multilingual evaluation of state-of-the-art ABSA approaches across seven languages (English, German, French, Dutch, Russian, Spanish, and Czech) and four subtasks (ACD, ACSA, TASD, ASQP). We systematically compare different transformer architectures under zero-resource, data-only, and full-resource settings, using cross-lingual transfer, code-switching and machine translation. Fine-tuned Large Language Models (LLMs) achieve the highest overall scores, particularly in complex generative tasks, while few-shot counterparts approach this performance in simpler setups, where smaller encoder models also remain competitive. Cross-lingual training on multiple non-target languages yields the strongest transfer for fine-tuned LLMs, while smaller encoder or seq-to-seq models benefit most from code-switching, highlighting architecture-specific strategies for multilingual ABSA. We further contribute two new German datasets, an adapted GERestaurant and the first German ASQP dataset (GERest), to encourage multilingual ABSA research beyond English.

Aspect-based Sentiment Analysis (ABSA) extracts fine-grained opinions toward specific aspects within text but remains largely English-focused despite major advances in transformer-based and instruction-tuned models.

Municipal solid waste incineration is increasingly central to urban waste management, yet its sustainability benefit depends on controlling carbon emissions and multiple air pollutants under highly heterogeneous operating conditions. Current data-driven models are often accurate within individual plants but are difficult to transfer across facilities, limiting their value for scalable emission-control strategies. Here we show that multi-site emission behaviour can be represented through transferable system-level structures when physical constraints, operating-regime heterogeneity and carbon--pollutant coupling are jointly considered. We develop a physics-informed transfer learning framework built on a carbon--pollutant mixture-of-experts model, which combines regime-dependent expert routing with conservation-based regularization and a carbon--pollutant synergistic index for integrated risk evaluation. Across 13 municipal solid waste incineration plants, the model captured both pollutant-specific emissions and system-level risk, achieving source-domain average pollutant $R^2$ values of 0.668--0.904 and CPSI $R^2$ values of 0.666--0.970. After transfer from a reference facility to 12 target plants, average pollutant $R^2$ remained between 0.661 and 0.842, while CPSI retained comparable transferability ($R^2$ = 0.610--0.841). Expert-utilization patterns further indicate that adaptation occurs through structured re-weighting of operating regimes rather than complete model re-learning. By extending the learned representation into an interpretable digital twin, this framework provides a route from emission prediction to regime-aware operational navigation, supporting scalable carbon--pollutant synergistic control across heterogeneous waste-to-energy systems.

Municipal solid waste incineration is increasingly central to urban waste management, yet its sustainability benefit depends on controlling carbon emissions and multiple air pollutants under highly heterogeneous operating conditions.

Tactile sensing provides local essential information that is complementary to visual perception, such as texture, compliance, and force. Despite recent advances in visuotactile representation learning, challenges remain in fusing these modalities and generalizing across tasks and environments without heavy reliance on pre-trained vision-language models. Moreover, existing methods do not study positional encodings, thereby overlooking the multi-stage spatial reasoning needed to capture fine-grained visuotactile correlations. We introduce ViTaPEs, a transformer-based architecture for learning task-agnostic visuotactile representations from paired vision and tactile inputs. Our key idea is a two-stage positional injection: local (modality-specific) positional encodings are added within each stream, and a global positional encoding is added on the joint token sequence immediately before attention, providing a shared positional vocabulary at the stage where cross-modal interaction occurs. We make the positional injection points explicit and conduct controlled ablations that isolate their effect before a token-wise nonlinearity versus immediately before self-attention. Experiments on multiple large-scale real-world datasets show that ViTaPEs not only surpasses state-of-the-art baselines across various recognition tasks but also demonstrates zero-shot generalization to unseen, out-of-domain scenarios. We further demonstrate the transfer-learning strength of \emph{ViTaPEs} in a robotic grasping task, where it outperforms state-of-the-art baselines in predicting grasp success. Project page: https://sites.google.com/view/vitapes

Tactile sensing provides local essential information that is complementary to visual perception, such as texture, compliance, and force.

The challenge of reducing the size of Large Language Models (LLMs) while maintaining their performance has gained significant attention. However, existing methods, such as model distillation and transfer learning, often fail to achieve high accuracy. To address this limitation, we introduce the Branch-Merge distillation approach, which enhances model compression through two phases: (1) the Branch Phase, where knowledge from a large teacher model is \textit{selectively distilled} into specialized student models via domain-specific supervised fine-tuning (SFT); And (2) the Merge Phase, where these student models are merged to enable cross-domain knowledge transfer and improve generalization. We validate our distillation approach using DeepSeek-R1 as the teacher and DeepSeek-R1-Distill-Qwen-32B as the student. The resulting merged model, TinyR1-32B-Preview, outperforms its counterpart DeepSeek-R1-Distill-Qwen-32B across multiple benchmarks, including Mathematics (+5.5 points), Coding (+4.4 points) and Science (+2.9 points), while achieving near-equal performance to DeepSeek-R1 on AIME 2024. The Branch-Merge distillation approach provides a scalable solution for creating smaller, high-performing LLMs with reduced computational cost and time.

The challenge of reducing the size of Large Language Models (LLMs) while maintaining their performance has gained significant attention.

Balancing differential privacy (DP) with recommendation accuracy is a key challenge in privacy-preserving recommender systems, since DP-noise degrades accuracy. We address this trade-off at both the data and model levels. At the data level, we apply DP only to the most stereotypical user data likely to reveal sensitive attributes, such as gender or age, to reduce unnecessary perturbation; we refer to this as targeted DP. At the model level, we use meta-learning to improve robustness to remaining DP-noise. This achieves a better trade-off between accuracy and privacy than standard approaches: Meta-learning improves accuracy and targeted DP leads to lower empirical privacy risk compared to uniformly applied DP and full DP baselines. Overall, our findings show that selectively applying DP at the data level together with meta-learning at the model level can effectively balance recommendation accuracy and user privacy.

Balancing differential privacy (DP) with recommendation accuracy is a key challenge in privacy-preserving recommender systems, since DP-noise degrades accuracy.

LoRA-MoE has emerged as an effective paradigm for parameter-efficient fine-tuning, combining the low training cost of LoRA with the increased adaptation capacity of Mixture-of-Experts (MoE). However, existing LoRA-MoE frameworks typically adopt a fixed and uniform expert configuration across heterogeneous Transformer modules (\eg, attention query/key projections and MLP gating networks), ignoring their distinct functional roles and capacity requirements. This design leads to localized over-provisioning, redundant trainable parameters, and unnecessary optimizer-state overhead. Moreover, prior methods enforce load balancing among experts throughout training. Although beneficial in the early stage, this constraint becomes restrictive once routing patterns stabilize, limiting expert specialization on downstream tasks. In this paper, we propose DMEP, a novel LoRA-MoE fine-tuning framework based on Dynamic Module-wise Expert Pruning. DMEP tracks expert utilization during training and physically removes low-utility experts on a per-module basis, yielding a more compact expert structure tailored to different modules. The pruned model then continues training without the load-balancing constraint, freeing the remaining experts to focus entirely on the downstream task and develop specialized expertise. By jointly adapting module-wise expert capacity and eliminating unnecessary balancing, DMEP improves both parameter efficiency and training efficiency. Extensive experiments on multiple reasoning benchmarks show that DMEP reduces trainable parameters by 35\%--43\% and improves training throughput by about 10\%, while maintaining or surpassing the downstream reasoning accuracy of uniform LoRA-MoE baselines.

LoRA-MoE has emerged as an effective paradigm for parameter-efficient fine-tuning, combining the low training cost of LoRA with the increased adaptation capacity of Mixture-of-Experts (MoE).

Generative text-to-image models are advancing at an unprecedented pace, continuously shifting the perceptual quality ceiling and rendering previously collected labels unreliable for newer generations. To address this, we present ELIQ, a Label-free Framework for Quality Assessment of Evolving AI-generated Images. Specifically, ELIQ focuses on visual quality and prompt-image alignment, automatically constructs positive and aspect-specific negative pairs to cover both conventional distortions and AIGC-specific distortion modes, enabling transferable supervision without human annotations. Building on these pairs, ELIQ adapts a pre-trained multimodal model into a quality-aware critic via instruction tuning and predicts two-dimensional quality using lightweight gated fusion and a Quality Query Transformer. Experiments across multiple benchmarks demonstrate that ELIQ consistently outperforms existing label-free methods, generalizes from AI-generated content (AIGC) to user-generated content (UGC) scenarios without modification, and paves the way for scalable and label-free quality assessment under continuously evolving generative models. The code will be released upon publication.

Generative text-to-image models are advancing at an unprecedented pace, continuously shifting the perceptual quality ceiling and rendering previously collected labels unreliable for newer generations.

Physics-informed neural networks (PINNs) approximate solutions of partial differential equations (PDEs) by embedding physical laws into the loss function. In parameterized PDE families, variations in coefficients or boundary/initial conditions define distinct tasks. This makes training individual PINNs for each task computationally prohibitive, while cross-task transfer can be sensitive to task heterogeneity. While meta-learning can reduce retraining cost, existing methods often rely on a single global initialization and may suffer from negative transfer, particularly under feature-scarce coordinate inputs and limited training-task availability. We propose the Learning-Affinity Adaptive Modular Physics-Informed Neural Network (LAM-PINN), a compositional framework that leverages task-specific learning dynamics. LAM-PINN combines PDE parameters with learning-affinity metrics from brief transfer sessions to construct a task representation and cluster tasks even with coordinate-only inputs. It decomposes the model into cluster-specialized subnetworks and a shared meta network, and learns routing weights to selectively reuse modules instead of relying on a single global initialization. Across three PDE benchmarks, LAM-PINN achieves an average 19.7-fold reduction in mean squared error (MSE) on unseen tasks using only 10% of the training iterations required by conventional PINNs. These results indicate its effectiveness for generalization to unseen configurations within bounded design spaces of parameterized PDE families in resource-constrained engineering settings.

Physics-informed neural networks (PINNs) approximate solutions of partial differential equations (PDEs) by embedding physical laws into the loss function.

Controllable medical video generation has achieved remarkable progress, but it still lacks interpretability, which requires the alignment of generated contents with physical priors and faithful clinical manifestations. To push the boundaries from mere controllability to interpretability, we propose DepthPilot, the first interpretable framework for colonoscopy video generation. This work takes a step toward trustworthy generation through two synergistic paradigms. To achieve explicit geometric grounding, DepthPilot devises a prior distribution alignment strategy, injecting depth constraints into the diffusion backbone via parameter-efficient fine-tuning to ensure anatomical fidelity. To enhance intrinsic nonlinear modeling under these geometric constraints, DepthPilot employs an adaptive spline denoising module, replacing fixed linear weights with learnable spline functions to capture complex spatio-temporal dynamics. Extensive evaluations across three public datasets and in-house clinical data confirm DepthPilot's robust ability to produce physically consistent videos. It achieves FID scores below 15 across all benchmarks and ranks first in clinician assessments, bridging the gap between "visually realistic" and "clinically interpretable". Moreover, DepthPilot-generated videos are expected to enable reliable 3D reconstruction, facilitating surgical navigation and blind region identification, and serve as a foundation toward the colorectal world model.

Controllable medical video generation has achieved remarkable progress, but it still lacks interpretability, which requires the alignment of generated contents with physical priors and faithful clinical manifestations.

Adapting language models to the clinical domain through continued pretraining and instruction tuning requires costly retraining for each new model generation. We propose Cross-Architecture Proxy Tuning (CAPT), a model-ensembling approach that enables training-free adaptation of state-of-the-art general-domain models using existing clinical models. CAPT supports models with disjoint vocabularies, leveraging contrastive decoding to selectively inject clinically relevant signals while preserving the general-domain model's reasoning and fluency. On six clinical classification and text-generation tasks, CAPT with a new-generation general-domain model and an older-generation clinical model consistently outperforms both models individually and state-of-the-art ensembling approaches (average +17.6\% over UniTE, +41.4\% over proxy tuning across tasks). Through token-level analysis and physician case studies, we demonstrate that CAPT amplifies clinically actionable language, reduces context errors, and increases clinical specificity. This technique especially benefits healthcare institutions with constrained computational capacity that cannot support iterative clinical training and want to adopt emerging general-domain model advances.

Adapting language models to the clinical domain through continued pretraining and instruction tuning requires costly retraining for each new model generation.

Recent progress in language modeling has expanded the range of tasks that can be approached through natural language interfaces, including problems that require structured reasoning. However, it remains unclear how effectively limited-capacity language models can infer formal properties of relational structures when those structures are presented in textual form. We conduct a systematic study of graph-theoretic property inference in small instruction-tuned language models, isolating the roles of input representation and reasoning strategy. Across a diverse set of local and global graph metrics evaluated on three models, we find that small language models fail to achieve reliable graph property estimation: normalized errors consistently exceed the intrinsic dispersion of target properties, and rank correlations remain weak across all configurations. However, the failure is structured rather than uniform. Adjacency-list encodings consistently reduce error and improve ordinal consistency relative to edge-lists, and multi-branch reasoning yields measurable aggregate gains across configurations. These results show that without task-specific fine-tuning or architectural adaptation, graph property inference in pretrained small language models remains fundamentally unreliable, but that representational organization and inference design produce consistent differences. The findings characterize the conditions under which structured inference degrades and identify which design choices yield improvements even under constrained model capacity.

Recent progress in language modeling has expanded the range of tasks that can be approached through natural language interfaces, including problems that require structured reasoning.

Traditional benchmarks for large language models (LLMs), such as HELM and AIR-BENCH, primarily assess safety through breadth-oriented evaluation across diverse tasks and risk categories. However, real-world deployment often exposes a different class of risk: operational failures that arise under repeated inference on identical or near-identical prompts rather than from broad task-level underperformance. In high-stakes settings, response consistency and safety under sustained use are therefore critical. We introduce Accelerated Prompt Stress Testing (APST), a depth-oriented evaluation framework inspired by highly accelerated stress testing in reliability engineering. APST repeatedly samples identical prompts under controlled operational conditions (such as decoding temperature) to surface latent failure modes including hallucinations, refusal inconsistency, and unsafe completions. Rather than treating failures as isolated events, APST models them as stochastic outcomes of repeated inference and uses Bernoulli and binomial formulations to estimate per-inference failure probabilities. Applying APST to multiple instruction-tuned LLMs evaluated on AIR-BENCH 2024--derived safety and security prompts, we find that models with comparable shallow-evaluation scores can exhibit substantially different empirical failure rates under repeated sampling. These results show that single-sample or low-depth evaluation can obscure meaningful differences in deployment-relevant reliability. APST complements existing benchmark methodologies by providing a practical framework for estimating failure frequency under sustained use and comparing safety reliability across models and decoding configurations.

Traditional benchmarks for large language models (LLMs), such as HELM and AIR-BENCH, primarily assess safety through breadth-oriented evaluation across diverse tasks and risk categories.

In the last few decades, Markov chain Monte Carlo (MCMC) methods have been widely applied to Bayesian updating of structural dynamic models in the field of structural health monitoring. Recently, several MCMC algorithms have been developed that incorporate neural networks to enhance their performance for specific Bayesian model updating problems. However, a common challenge with these approaches lies in the fact that the embedded neural networks often necessitate retraining when faced with new tasks, a process that is time-consuming and significantly undermines the competitiveness of these methods. This paper introduces a newly developed adaptive meta-learning stochastic gradient Hamiltonian Monte Carlo (AM-SGHMC) algorithm. The idea behind AM-SGHMC is to optimize the sampling strategy by training adaptive neural networks, and due to the adaptive design of the network inputs and outputs, the trained sampler can be directly applied to various Bayesian updating problems of the same type of structure without further training, thereby achieving meta-learning. Additionally, practical issues for the feasibility of the AM-SGHMC algorithm for structural dynamic model updating are addressed, and two examples involving Bayesian updating of multi-story building models with different model fidelity are used to demonstrate the effectiveness and generalization ability of the proposed method.

In the last few decades, Markov chain Monte Carlo (MCMC) methods have been widely applied to Bayesian updating of structural dynamic models in the field of structural health monitoring.