AI4Science 论文速递

Aspect-based Sentiment Analysis (ABSA) extracts fine-grained opinions toward specific aspects within text but remains largely English-focused despite major advances in transformer-based and instruction-tuned models. This work presents a multilingual evaluation of state-of-the-art ABSA approaches across seven languages (English, German, French, Dutch, Russian, Spanish, and Czech) and four subtasks (ACD, ACSA, TASD, ASQP). We systematically compare different transformer architectures under zero-resource, data-only, and full-resource settings, using cross-lingual transfer, code-switching and machine translation. Fine-tuned Large Language Models (LLMs) achieve the highest overall scores, particularly in complex generative tasks, while few-shot counterparts approach this performance in simpler setups, where smaller encoder models also remain competitive. Cross-lingual training on multiple non-target languages yields the strongest transfer for fine-tuned LLMs, while smaller encoder or seq-to-seq models benefit most from code-switching, highlighting architecture-specific strategies for multilingual ABSA. We further contribute two new German datasets, an adapted GERestaurant and the first German ASQP dataset (GERest), to encourage multilingual ABSA research beyond English.

Aspect-based Sentiment Analysis (ABSA) extracts fine-grained opinions toward specific aspects within text but remains largely English-focused despite major advances in transformer-based and instruction-tuned models.

Municipal solid waste incineration is increasingly central to urban waste management, yet its sustainability benefit depends on controlling carbon emissions and multiple air pollutants under highly heterogeneous operating conditions. Current data-driven models are often accurate within individual plants but are difficult to transfer across facilities, limiting their value for scalable emission-control strategies. Here we show that multi-site emission behaviour can be represented through transferable system-level structures when physical constraints, operating-regime heterogeneity and carbon--pollutant coupling are jointly considered. We develop a physics-informed transfer learning framework built on a carbon--pollutant mixture-of-experts model, which combines regime-dependent expert routing with conservation-based regularization and a carbon--pollutant synergistic index for integrated risk evaluation. Across 13 municipal solid waste incineration plants, the model captured both pollutant-specific emissions and system-level risk, achieving source-domain average pollutant $R^2$ values of 0.668--0.904 and CPSI $R^2$ values of 0.666--0.970. After transfer from a reference facility to 12 target plants, average pollutant $R^2$ remained between 0.661 and 0.842, while CPSI retained comparable transferability ($R^2$ = 0.610--0.841). Expert-utilization patterns further indicate that adaptation occurs through structured re-weighting of operating regimes rather than complete model re-learning. By extending the learned representation into an interpretable digital twin, this framework provides a route from emission prediction to regime-aware operational navigation, supporting scalable carbon--pollutant synergistic control across heterogeneous waste-to-energy systems.

Municipal solid waste incineration is increasingly central to urban waste management, yet its sustainability benefit depends on controlling carbon emissions and multiple air pollutants under highly heterogeneous operating conditions.

Tactile sensing provides local essential information that is complementary to visual perception, such as texture, compliance, and force. Despite recent advances in visuotactile representation learning, challenges remain in fusing these modalities and generalizing across tasks and environments without heavy reliance on pre-trained vision-language models. Moreover, existing methods do not study positional encodings, thereby overlooking the multi-stage spatial reasoning needed to capture fine-grained visuotactile correlations. We introduce ViTaPEs, a transformer-based architecture for learning task-agnostic visuotactile representations from paired vision and tactile inputs. Our key idea is a two-stage positional injection: local (modality-specific) positional encodings are added within each stream, and a global positional encoding is added on the joint token sequence immediately before attention, providing a shared positional vocabulary at the stage where cross-modal interaction occurs. We make the positional injection points explicit and conduct controlled ablations that isolate their effect before a token-wise nonlinearity versus immediately before self-attention. Experiments on multiple large-scale real-world datasets show that ViTaPEs not only surpasses state-of-the-art baselines across various recognition tasks but also demonstrates zero-shot generalization to unseen, out-of-domain scenarios. We further demonstrate the transfer-learning strength of \emph{ViTaPEs} in a robotic grasping task, where it outperforms state-of-the-art baselines in predicting grasp success. Project page: https://sites.google.com/view/vitapes

Tactile sensing provides local essential information that is complementary to visual perception, such as texture, compliance, and force.

The challenge of reducing the size of Large Language Models (LLMs) while maintaining their performance has gained significant attention. However, existing methods, such as model distillation and transfer learning, often fail to achieve high accuracy. To address this limitation, we introduce the Branch-Merge distillation approach, which enhances model compression through two phases: (1) the Branch Phase, where knowledge from a large teacher model is \textit{selectively distilled} into specialized student models via domain-specific supervised fine-tuning (SFT); And (2) the Merge Phase, where these student models are merged to enable cross-domain knowledge transfer and improve generalization. We validate our distillation approach using DeepSeek-R1 as the teacher and DeepSeek-R1-Distill-Qwen-32B as the student. The resulting merged model, TinyR1-32B-Preview, outperforms its counterpart DeepSeek-R1-Distill-Qwen-32B across multiple benchmarks, including Mathematics (+5.5 points), Coding (+4.4 points) and Science (+2.9 points), while achieving near-equal performance to DeepSeek-R1 on AIME 2024. The Branch-Merge distillation approach provides a scalable solution for creating smaller, high-performing LLMs with reduced computational cost and time.

The challenge of reducing the size of Large Language Models (LLMs) while maintaining their performance has gained significant attention.

Balancing differential privacy (DP) with recommendation accuracy is a key challenge in privacy-preserving recommender systems, since DP-noise degrades accuracy. We address this trade-off at both the data and model levels. At the data level, we apply DP only to the most stereotypical user data likely to reveal sensitive attributes, such as gender or age, to reduce unnecessary perturbation; we refer to this as targeted DP. At the model level, we use meta-learning to improve robustness to remaining DP-noise. This achieves a better trade-off between accuracy and privacy than standard approaches: Meta-learning improves accuracy and targeted DP leads to lower empirical privacy risk compared to uniformly applied DP and full DP baselines. Overall, our findings show that selectively applying DP at the data level together with meta-learning at the model level can effectively balance recommendation accuracy and user privacy.

Balancing differential privacy (DP) with recommendation accuracy is a key challenge in privacy-preserving recommender systems, since DP-noise degrades accuracy.

LoRA-MoE has emerged as an effective paradigm for parameter-efficient fine-tuning, combining the low training cost of LoRA with the increased adaptation capacity of Mixture-of-Experts (MoE). However, existing LoRA-MoE frameworks typically adopt a fixed and uniform expert configuration across heterogeneous Transformer modules (\eg, attention query/key projections and MLP gating networks), ignoring their distinct functional roles and capacity requirements. This design leads to localized over-provisioning, redundant trainable parameters, and unnecessary optimizer-state overhead. Moreover, prior methods enforce load balancing among experts throughout training. Although beneficial in the early stage, this constraint becomes restrictive once routing patterns stabilize, limiting expert specialization on downstream tasks. In this paper, we propose DMEP, a novel LoRA-MoE fine-tuning framework based on Dynamic Module-wise Expert Pruning. DMEP tracks expert utilization during training and physically removes low-utility experts on a per-module basis, yielding a more compact expert structure tailored to different modules. The pruned model then continues training without the load-balancing constraint, freeing the remaining experts to focus entirely on the downstream task and develop specialized expertise. By jointly adapting module-wise expert capacity and eliminating unnecessary balancing, DMEP improves both parameter efficiency and training efficiency. Extensive experiments on multiple reasoning benchmarks show that DMEP reduces trainable parameters by 35\%--43\% and improves training throughput by about 10\%, while maintaining or surpassing the downstream reasoning accuracy of uniform LoRA-MoE baselines.

LoRA-MoE has emerged as an effective paradigm for parameter-efficient fine-tuning, combining the low training cost of LoRA with the increased adaptation capacity of Mixture-of-Experts (MoE).

Generative text-to-image models are advancing at an unprecedented pace, continuously shifting the perceptual quality ceiling and rendering previously collected labels unreliable for newer generations. To address this, we present ELIQ, a Label-free Framework for Quality Assessment of Evolving AI-generated Images. Specifically, ELIQ focuses on visual quality and prompt-image alignment, automatically constructs positive and aspect-specific negative pairs to cover both conventional distortions and AIGC-specific distortion modes, enabling transferable supervision without human annotations. Building on these pairs, ELIQ adapts a pre-trained multimodal model into a quality-aware critic via instruction tuning and predicts two-dimensional quality using lightweight gated fusion and a Quality Query Transformer. Experiments across multiple benchmarks demonstrate that ELIQ consistently outperforms existing label-free methods, generalizes from AI-generated content (AIGC) to user-generated content (UGC) scenarios without modification, and paves the way for scalable and label-free quality assessment under continuously evolving generative models. The code will be released upon publication.

Generative text-to-image models are advancing at an unprecedented pace, continuously shifting the perceptual quality ceiling and rendering previously collected labels unreliable for newer generations.

Controllable medical video generation has achieved remarkable progress, but it still lacks interpretability, which requires the alignment of generated contents with physical priors and faithful clinical manifestations. To push the boundaries from mere controllability to interpretability, we propose DepthPilot, the first interpretable framework for colonoscopy video generation. This work takes a step toward trustworthy generation through two synergistic paradigms. To achieve explicit geometric grounding, DepthPilot devises a prior distribution alignment strategy, injecting depth constraints into the diffusion backbone via parameter-efficient fine-tuning to ensure anatomical fidelity. To enhance intrinsic nonlinear modeling under these geometric constraints, DepthPilot employs an adaptive spline denoising module, replacing fixed linear weights with learnable spline functions to capture complex spatio-temporal dynamics. Extensive evaluations across three public datasets and in-house clinical data confirm DepthPilot's robust ability to produce physically consistent videos. It achieves FID scores below 15 across all benchmarks and ranks first in clinician assessments, bridging the gap between "visually realistic" and "clinically interpretable". Moreover, DepthPilot-generated videos are expected to enable reliable 3D reconstruction, facilitating surgical navigation and blind region identification, and serve as a foundation toward the colorectal world model.

Controllable medical video generation has achieved remarkable progress, but it still lacks interpretability, which requires the alignment of generated contents with physical priors and faithful clinical manifestations.

Adapting language models to the clinical domain through continued pretraining and instruction tuning requires costly retraining for each new model generation. We propose Cross-Architecture Proxy Tuning (CAPT), a model-ensembling approach that enables training-free adaptation of state-of-the-art general-domain models using existing clinical models. CAPT supports models with disjoint vocabularies, leveraging contrastive decoding to selectively inject clinically relevant signals while preserving the general-domain model's reasoning and fluency. On six clinical classification and text-generation tasks, CAPT with a new-generation general-domain model and an older-generation clinical model consistently outperforms both models individually and state-of-the-art ensembling approaches (average +17.6\% over UniTE, +41.4\% over proxy tuning across tasks). Through token-level analysis and physician case studies, we demonstrate that CAPT amplifies clinically actionable language, reduces context errors, and increases clinical specificity. This technique especially benefits healthcare institutions with constrained computational capacity that cannot support iterative clinical training and want to adopt emerging general-domain model advances.

Adapting language models to the clinical domain through continued pretraining and instruction tuning requires costly retraining for each new model generation.

Recent progress in language modeling has expanded the range of tasks that can be approached through natural language interfaces, including problems that require structured reasoning. However, it remains unclear how effectively limited-capacity language models can infer formal properties of relational structures when those structures are presented in textual form. We conduct a systematic study of graph-theoretic property inference in small instruction-tuned language models, isolating the roles of input representation and reasoning strategy. Across a diverse set of local and global graph metrics evaluated on three models, we find that small language models fail to achieve reliable graph property estimation: normalized errors consistently exceed the intrinsic dispersion of target properties, and rank correlations remain weak across all configurations. However, the failure is structured rather than uniform. Adjacency-list encodings consistently reduce error and improve ordinal consistency relative to edge-lists, and multi-branch reasoning yields measurable aggregate gains across configurations. These results show that without task-specific fine-tuning or architectural adaptation, graph property inference in pretrained small language models remains fundamentally unreliable, but that representational organization and inference design produce consistent differences. The findings characterize the conditions under which structured inference degrades and identify which design choices yield improvements even under constrained model capacity.

Recent progress in language modeling has expanded the range of tasks that can be approached through natural language interfaces, including problems that require structured reasoning.

Traditional benchmarks for large language models (LLMs), such as HELM and AIR-BENCH, primarily assess safety through breadth-oriented evaluation across diverse tasks and risk categories. However, real-world deployment often exposes a different class of risk: operational failures that arise under repeated inference on identical or near-identical prompts rather than from broad task-level underperformance. In high-stakes settings, response consistency and safety under sustained use are therefore critical. We introduce Accelerated Prompt Stress Testing (APST), a depth-oriented evaluation framework inspired by highly accelerated stress testing in reliability engineering. APST repeatedly samples identical prompts under controlled operational conditions (such as decoding temperature) to surface latent failure modes including hallucinations, refusal inconsistency, and unsafe completions. Rather than treating failures as isolated events, APST models them as stochastic outcomes of repeated inference and uses Bernoulli and binomial formulations to estimate per-inference failure probabilities. Applying APST to multiple instruction-tuned LLMs evaluated on AIR-BENCH 2024--derived safety and security prompts, we find that models with comparable shallow-evaluation scores can exhibit substantially different empirical failure rates under repeated sampling. These results show that single-sample or low-depth evaluation can obscure meaningful differences in deployment-relevant reliability. APST complements existing benchmark methodologies by providing a practical framework for estimating failure frequency under sustained use and comparing safety reliability across models and decoding configurations.

Traditional benchmarks for large language models (LLMs), such as HELM and AIR-BENCH, primarily assess safety through breadth-oriented evaluation across diverse tasks and risk categories.

In the last few decades, Markov chain Monte Carlo (MCMC) methods have been widely applied to Bayesian updating of structural dynamic models in the field of structural health monitoring. Recently, several MCMC algorithms have been developed that incorporate neural networks to enhance their performance for specific Bayesian model updating problems. However, a common challenge with these approaches lies in the fact that the embedded neural networks often necessitate retraining when faced with new tasks, a process that is time-consuming and significantly undermines the competitiveness of these methods. This paper introduces a newly developed adaptive meta-learning stochastic gradient Hamiltonian Monte Carlo (AM-SGHMC) algorithm. The idea behind AM-SGHMC is to optimize the sampling strategy by training adaptive neural networks, and due to the adaptive design of the network inputs and outputs, the trained sampler can be directly applied to various Bayesian updating problems of the same type of structure without further training, thereby achieving meta-learning. Additionally, practical issues for the feasibility of the AM-SGHMC algorithm for structural dynamic model updating are addressed, and two examples involving Bayesian updating of multi-story building models with different model fidelity are used to demonstrate the effectiveness and generalization ability of the proposed method.

In the last few decades, Markov chain Monte Carlo (MCMC) methods have been widely applied to Bayesian updating of structural dynamic models in the field of structural health monitoring.

Introduction: Semantic search, which retrieves documents based on conceptual similarity rather than keyword matching, offers substantial advantages for retrieval of clinical information. However, deploying semantic search across entire health systems, comprising hundreds of millions of clinical notes, presents formidable engineering, cost, and governance challenges that have prevented adoption. Methods: We deployed a semantic search system at a large children's hospital indexing 166 million clinical notes (484 million vectors) from 1.68 million patients. The system uses instruction-tuned qwen3-embedding-0.6B embeddings, stores vectors in a managed database with storage-optimized indexing, maintains full-text metadata in a low-latency key-value store, and operates within a HIPAA-compliant governance framework. We evaluated the system through three experiments: optimization of embedding model and chunking strategy using a physician-authored benchmark dataset, characterization of full-scale performance (cost, latency, retrieval quality), and clinical utility assessment via comparison of chart abstraction efficiency across three tasks. Results: The system delivers sub-second query latency (median 237 ms single-user, 451 ms 20-user concurrency) with monthly costs of approximately USD 4,000. Qwen3 embeddings with 300-token chunk size achieved 94.6% accuracy on a clinical question-answering benchmark. In clinical utility evaluation across three abstraction tasks, semantic search reduced time-to-completion by 24 to 89% compared to clinician-performed chart review while maintaining comparable inter-rater agreement. Conclusion: Health-system-scale semantic search is both technically and operationally feasible. The system provides infrastructure supporting interactive search, cohort generation, and downstream LLM-powered clinical applications without requiring specialized informatics expertise.

Introduction: Semantic search, which retrieves documents based on conceptual similarity rather than keyword matching, offers substantial advantages for retrieval of clinical information.

Federated fine-tuning provides a practical route to adapt large language models (LLMs) on edge devices without centralizing private data, yet in mobile deployments the training wall-clock is often bottlenecked by straggler-limited uplink communication under heterogeneous bandwidth and intermittent participation. Although parameter-efficient fine-tuning (PEFT) reduces trainable parameters, per-round payloads remain prohibitive in non-IID regimes, where uniform compression can discard rare but task-critical signals. We propose Fed-FSTQ, a Fisher-guided token quantization system primitive for communication-efficient federated LLM fine-tuning. Fed-FSTQ employs a lightweight Fisher proxy to estimate token sensitivity, coupling importance-aware token selection with non-uniform mixed-precision quantization to allocate higher fidelity to informative evidence while suppressing redundant transmission. The method is model-agnostic, serves as a drop-in module for standard federated PEFT pipelines, e.g., LoRA, without modifying the server aggregation rule, and supports bandwidth-heterogeneous clients via compact sparse message packing. Experiments on multilingual QA and medical QA under non-IID partitions show that Fed-FSTQ reduces cumulative uplink traffic required to reach a fixed quality threshold by 46x relative to a standard LoRA baseline, and improves end-to-end wall-clock time-to-accuracy by 52%. Furthermore, enabling Fisher-guided token reduction at inference yields up to a 1.55x end-to-end speedup on NVIDIA Jetson-class edge devices, demonstrating deployability under tight resource constraints.

Federated fine-tuning provides a practical route to adapt large language models (LLMs) on edge devices without centralizing private data, yet in mobile deployments the training wall-clock is often bottlenecked by straggler-limited uplink communication under heterogeneous bandwidth and intermittent participation.

Bilevel optimization reveals the inner structure of otherwise oblique optimization problems, such as hyperparameter tuning, neural architecture search, and meta-learning. A common goal in bilevel optimization is to minimize a hyper-objective that implicitly depends on the solution set of the lower-level function. Although this hyper-objective approach is widely used, its theoretical properties have not been thoroughly investigated in cases where the lower-level functions lack strong convexity. In this work, we first provide hardness results to show that the goal of finding stationary points of the hyper-objective for nonconvex-convex bilevel optimization can be intractable for zero-respecting algorithms. Then we study a class of tractable nonconvex-nonconvex bilevel problems when the lower-level function satisfies the Polyak-Łojasiewicz (PL) condition. We show a simple first-order algorithm can achieve better complexity bounds of $\tilde{\mathcal{O}}(ε^{-2})$, $\tilde{\mathcal{O}}(ε^{-4})$ and $\tilde{\mathcal{O}}(ε^{-6})$ in the deterministic, partially stochastic, and fully stochastic setting respectively. The complexities in the first two cases are optimal up to logarithmic factors.

Bilevel optimization reveals the inner structure of otherwise oblique optimization problems, such as hyperparameter tuning, neural architecture search, and meta-learning.

Detecting sandbagging--the deliberate underperformance on capability evaluations--is an open problem in AI safety. We tested whether symptom validity testing (SVT) logic from clinical malingering detection could identify sandbagging through below-chance performance (BCB) on forced-choice items. In a pre-registered pilot at the 7-9 billion parameter instruction-tuned scale (3 models, 4 MMLU-Pro domains, 4 conditions, 500 items per cell, 24,000 total trials), the plausibility gate failed. Zero of 12 model-domain cells showed significant below-chance performance under sandbagging instruction. Exploratory analyses revealed three qualitatively distinct failure modes. Qwen-2.5-7B and Phi-3.5-mini largely ignored the sandbagging instruction, with 62-88% response identity with the honest baseline. Llama-3-8B complied substantially but implemented underperformance as a positional heuristic, collapsing its response distribution onto middle-alphabet options (E at 31.8%, F at 26.1%) regardless of where the correct answer fell. This produced accuracy boosts of up to 33 percentage points when the correct answer coincidentally occupied the model's preferred position. An explicit anti-task instruction ("pick the least likely answer") drove two of three models below chance, with accuracy as low as 0.024. The capability for answer-aware avoidance therefore exists but is not activated by "deliberately underperform." BCB did not fail as a logical marker of answer-aware avoidance. It was not observed in this regime because the model showing the largest behavioural shift exhibited behaviour consistent with a position-dominant response policy rather than content-aware answer avoidance. We propose that positional-distribution shift may be a more effective behavioural signature than below-chance accuracy for detecting prompted underperformance at this model scale.

Detecting sandbagging--the deliberate underperformance on capability evaluations--is an open problem in AI safety.

Refusal on harmful prompts is a key safety behaviour in instruction-tuned large language models (LLMs), yet the internal causes of this behaviour remain poorly understood. We study two public instruction-tuned models, Gemma-2-2B-IT and LLaMA-3.1-8B-IT, using sparse autoencoders (SAEs) trained on residual-stream activations. Given a harmful prompt, we search the SAE latent space for feature sets whose ablation flips the model from refusal to compliance, demonstrating causal influence and creating a jailbreak. Our search proceeds in three stages: (1) Refusal Direction: find a refusal-mediating direction and collect SAE features near that direction; (2) Greedy Filtering: prune to a minimal set; and (3) Interaction Discovery: fit a factorization machine (FM) that captures nonlinear interactions among the remaining active features and the minimal set. This pipeline yields a broad set of jailbreak-critical features, offering insight into the mechanistic basis of refusal. Moreover, we find evidence of redundant features that remain dormant unless earlier features are suppressed. Our findings highlight the potential for fine-grained auditing and targeted intervention in safety behaviours by manipulating the interpretable latent space.

Refusal on harmful prompts is a key safety behaviour in instruction-tuned large language models (LLMs), yet the internal causes of this behaviour remain poorly understood.

Tabular Foundation Models (TFMs) achieve state-of-the-art zero-shot accuracy on small tabular datasets by meta-learning over synthetic data-generating processes -- making them highly attractive for practitioners who cannot afford large annotated corpora. However, their in-context learning mechanism assumes approximately clean inputs: missing values, outliers, and duplicates in the real-world data create a prior mismatch that degrades both accuracy and confidence calibration simultaneously. Correcting this mismatch requires sequential decisions over cleaning operators whose interactions no static preprocessing rule can anticipate -a natural fit for reinforcement learning~(RL). We introduce L2C2, the first deep RL framework framing tabular data cleaning as prior alignment: a learned policy sequences operators to minimize the distributional gap between dirty input and the TFM's synthetic prior. Six experiments on ten OpenML benchmark datasets establish: 1) three of seven reward designs collapse to degenerate trivial cleaning strategies -- principled reward engineering is scientifically non-trivial; 2) the novel TFMAwareReward reward we propose selects structurally distinct pipelines on 4/10 datasets and achieves higher TabPFN accuracy on those diverging cases (mean 0.851 vs. 0.843; Wilcoxon p=0.063, n=4) while never underperforming; 3) parameterized cleaning actions improve best-found pipeline reward on 9/10 datasets (Wilcoxon p=0.004); and 4) a policy pre-trained on one single source dataset exceeds scratch training at the 2,000-step fine-tuning checkpoint on all three held-out datasets (up to +28.8% after full fine-tuning) demonstrating cross-dataset transfer of prior-alignment knowledge. These findings establish that prior alignment is a principled data preparation strategy for TFM deployment on real-world tabular data.

Tabular Foundation Models (TFMs) achieve state-of-the-art zero-shot accuracy on small tabular datasets by meta-learning over synthetic data-generating processes -- making them highly attractive for practitioners who cannot afford large annotated corpora.

AI agents are increasingly deployed on complex, domain-specific workflows -- navigating enterprise web applications that require dozens of clicks and form fills, orchestrating multi-step research pipelines that span search, extraction, and synthesis, automating code review across unfamiliar repositories, and handling customer escalations that demand nuanced domain knowledge. \textbf{Each new task domain requires painstaking, expert-driven harness engineering}: designing the prompts, tools, orchestration logic, and evaluation criteria that make a foundation model effective. We present a two-level framework that automates this process. At the first level, the \textbf{Harness Evolution Loop} optimizes a worker agent's harness $\mathcal{H}$ for a single task: a Worker Agent $W_{\mathcal{H}}$ executes the task, an Evaluator Agent $V$ adversarially diagnoses failures and scores performance, and an Evolution Agent $E$ modifies the harness based on the full history of prior attempts. At the second level, the \textbf{Meta-Evolution Loop} optimizes the evolution blueprint $Λ= (W_{\mathcal{H}}, \mathcal{H}^{(0)}, V, E)$ itself across diverse tasks, \textbf{learning a blueprint $Λ^{(\text{best})}$ that enables rapid harness convergence on any new task -- so that adapting an agent to a novel domain requires no human harness engineering at all.} We formalize the correspondence to meta-learning and present both algorithms. The framework \textbf{shifts manual harness engineering into automated harness engineering}, and takes one step further -- \textbf{automating the design of the automation itself}.

AI agents are increasingly deployed on complex, domain-specific workflows -- navigating enterprise web applications that require dozens of clicks and form fills, orchestrating multi-step research pipelines that span search, extraction, and synthesis, automating code review across unfamiliar repositories, and handling customer escalations that demand nuanced domain knowledge.

Instruction-tuning datasets often contain substantial redundancy and low-quality samples, necessitating effective data selection methods. We propose an instruction data selection framework based on weighted in-context influence (wICI), which measures how effectively each candidate example reduces instruction-following difficulty for semantically related peers. Through systematic experiments, we address three key questions: what constitutes effective instruction tuning data from an in-context perspective, whether sample difficulty correlates with in-context influence, and how in-context influence translates to instruction tuning effectiveness. Experiments across multiple models and benchmarks demonstrate that our method consistently outperforms existing baselines under constrained data budgets, while empirically showing that sample difficulty negatively correlates with in-context influence.

Instruction-tuning datasets often contain substantial redundancy and low-quality samples, necessitating effective data selection methods.

We introduce Functional Group-Aware Representations for Small Molecules (FARM), a novel foundation model designed to bridge the gap between SMILES, natural language, and molecular graphs. The key idea behind FARM is the incorporation of functional group (FG) annotations at the atomic level, enabling both FG-enhanced SMILES and FG graphs. In this representation, SMILES strings are enriched with functional group information that identifies the group membership of each atom, while the FG graph captures molecular structure by representing how functional groups are connected. This tokenization injects chemical knowledge into SMILES and expands the effective molecular vocabulary, making the representation more suitable for Transformer-based models and more aligned with natural language structure. FARM learns molecular representations from two complementary perspectives to jointly encode functional and structural information. Masked language modeling on FG-enhanced SMILES captures atom-level features enriched with functional context, while graph neural networks model higher-level molecular topology through functional group connectivity. Contrastive learning is then used to align these two views into a unified embedding space, ensuring that both atom-level detail and functional group structure are jointly represented. We evaluate FARM on the MoleculeNet benchmark and achieve state-of-the-art performance on 8 out of 13 tasks. We further validate its generalization ability on a photostability dataset for quantum mechanical properties. These results demonstrate that FARM improves molecular representation learning, supports strong transfer learning across drug discovery and materials science, and enables broad applications in pharmaceutical research and functional material design.

We introduce Functional Group-Aware Representations for Small Molecules (FARM), a novel foundation model designed to bridge the gap between SMILES, natural language, and molecular graphs.

We introduce HAML (Hamiltonian Adaptation via Meta-Learning), a framework for fast online adaptation of effective Hamiltonian models of superconducting quantum processors. HAML proceeds in two phases. A supervised training phase uses an ensemble of simulated devices to learn an offline map from control inputs and device parameters to effective Hamiltonian coefficients. An online adaptation phase then uses a small number of hardware-accessible measurements to identify the unknown parameters of a new device. By training directly against effective two-qubit coefficients extracted from full multi-mode simulations, HAML implicitly learns the reduction from full multi-mode Hamiltonians to effective qubit descriptions without invoking perturbation theory. We further show that a variance-maximizing greedy selection of measurement configurations boosts online adaptation efficiency. We demonstrate HAML on a transmon-coupler-transmon system, recovering effective two-qubit coefficients across a wide range of operating regimes, including parameter regions where Schrieffer-Wolff perturbation theory (SWPT) breaks down. This establishes a scalable, sample-efficient approach to Hamiltonian reduction and characterization for near-term quantum processors, with direct implications for calibration, control, and error mitigation.

We introduce HAML (Hamiltonian Adaptation via Meta-Learning), a framework for fast online adaptation of effective Hamiltonian models of superconducting quantum processors.

Instruction-tuned large language models produce helpful, structured responses, but how robust is this helpfulness under trivial constraints? We show that simple lexical constraints (banning a single punctuation character or common word) cause instruction-tuned LLMs to collapse their responses, losing 14--48\% of comprehensiveness across seven models spanning five families (7B--70B, open- and closed-weight). A blinded human evaluation with 10 STEM-trained evaluators confirms genuine content loss, with information criteria degrading $1.5$--$2.3\times$ more than surface criteria, a finding corroborated by over 4,100 automated pairwise comparisons (77--100\% baseline preference) across three LLM judges from two model families. Diagnostic analysis identifies this as a \emph{planning failure}: two-pass generation recovers 59--96\% of response length, and linear probes on prompt representations predict response length with $R^2 = 0.51$--$0.94$ before generation begins. The same probes yield negative $R^2$ on base models, confirming that instruction tuning introduces the representational structure underlying the collapse. Base models show no systematic degradation under identical constraints, demonstrating that instruction tuning couples task competence to narrow surface-form templates. The effect extends to realistic deployment constraints (preamble suppression, corporate tone guidelines, legal compliance hedging, accessibility requirements) causing comparable degradation ($-$22\% to $-$34\%), with suppressing the conversational opener alone (``Certainly!'') causing 40\% collapse on our most fragile model despite restricting only the opening tokens. We further show that standard independent LLM-as-judge evaluation detects only a 3.5\% quality drop where pairwise evaluation reveals 23\%, exposing a methodological blind spot in current evaluation practice.

Instruction-tuned large language models produce helpful, structured responses, but how robust is this helpfulness under trivial constraints?

Pathology foundation models (PFMs) have recently emerged as powerful pretrained encoders for computational pathology, enabling transfer learning across a wide range of downstream tasks. However, systematic comparisons of these models for clinically meaningful prediction problems remain limited, especially in the context of survival prediction under external validation. In this study, we benchmark widely used and recently proposed PFMs for breast cancer survival prediction from whole-slide histopathology images. Using a standardized pipeline based on patch-level feature extraction and a unified survival modeling framework, we evaluate model representations across three independent clinical cohorts comprising more than 5,400 patients with long-term follow-up. Models are trained on one cohort and evaluated on two independent external cohorts, enabling a rigorous assessment of cross-dataset generalization. Overall, H-optimus-1 achieves the strongest survival prediction performance. More broadly, we observe consistent generational improvements across model families, with second-generation PFMs outperforming their first-generation counterparts. However, absolute performance differences between many recent PFMs remain modest, suggesting diminishing returns from further scaling of pretraining data or model size alone. Notably, the compact distilled model H0-mini slightly outperforms its larger teacher model H-optimus-0, despite using fewer than 8% of the parameters and enabling significantly faster feature extraction. Together, these results provide the first large-scale, externally validated benchmark of PFMs for breast cancer survival prediction, and offer practical guidance for efficient deployment of PFMs in clinical workflows.

Pathology foundation models (PFMs) have recently emerged as powerful pretrained encoders for computational pathology, enabling transfer learning across a wide range of downstream tasks.

Large language models (LLMs) perform strongly on general-purpose code generation, yet their applicability to enterprise domain-specific languages (DSLs) remains underexplored, especially for repository-scale change generation spanning multiple files and folder structures from a single natural-language (NL) instruction. We report an industrial case study at BMW that adapts code-oriented LLMs to generate and modify project-root DSL artifacts for an Xtext-based DSL that drives downstream Java/TypeScript code generation. We develop an end-to-end pipeline for dataset construction, multi-file task representation, model adaptation, and evaluation. We encode DSL folder hierarchies as structured, path-preserving JSON, allowing single-response generation at repository scale and learning cross-file dependencies. We evaluate two instruction-tuned code LLMs (Qwen2.5-Coder and DeepSeek-Coder, 7B) under three configurations: baseline prompting, one-shot in-context learning, and parameter-efficient fine-tuning (QLoRA). Beyond standard similarity metrics, we introduce task-specific measures that assess edit correctness and repository structural fidelity. Fine-tuning yields the most significant gains across models and metrics, achieving high exact-match accuracy, substantial edit similarity, and structural fidelity of 1.00 on our held-out set for multi-file outputs. At the same time, one-shot in-context learning provides smaller but consistent improvements over baseline prompting. We further validate practical utility via an expert developer survey and an execution-based check using the existing code generator.

Large language models (LLMs) perform strongly on general-purpose code generation, yet their applicability to enterprise domain-specific languages (DSLs) remains underexplored, especially for repository-scale change generation spanning multiple files and folder structures from a single natural-language (NL) instruction.

In the noisy intermediate-scale quantum (NISQ) regime, quantum devices contain hardware-specific noise sources which restrict device-invariant error mitigation strategies. We explore transfer learning approaches to apply noise models learned on one quantum device to a different device with the help of a small amount of data. We create a real-hardware dataset from two IBM quantum devices, ibm_fez (source) and ibm_marrakesh (target), comprising 170 noisy and ideal circuit output distributions, with device calibration features added. We train a residual neural network on the source device to map noisy to ideal outcomes. The zero-shot transfer test shows a KL divergence of 1.6706 (up from 0.3014), establishing device specificity. With K = 20 fine-tuning samples, KL drops to 1.1924 (28.6% improvement over zero-shot), recovering 34.9% of the gap between zero-shot and in-domain KL. Ablation studies reveal that the major cause of mismatches across devices is CX gate error, followed by readout error. The results show quantum noise can be learned and fine-tuned with minimal samples, and provide a plausible approach to cross-device quantum error mitigation.

In the noisy intermediate-scale quantum (NISQ) regime, quantum devices contain hardware-specific noise sources which restrict device-invariant error mitigation strategies.

Distributed Fiber Optic Sensing (DFOS) is promising for long-range perimeter security, yet practical deployment faces three key obstacles: severe cross-deployment domain shift, scarce or unavailable labels at new sites, and limited within-class coverage even in source deployments. We propose DUPLE, a prototype-based meta-learning framework tailored for cross-deployment DFOS recognition. The core idea is to jointly exploit complementary time- and frequency-domain cues and adapt class representations to sample-specific statistics: (i) a dual-domain learner constructs multi-prototype class representations to cover intra-class heterogeneity; (ii) a lightweight statistical guidance mechanism estimates the reliability of each domain from raw signal statistics; and (iii) a query-adaptive aggregation strategy selects and combines the most relevant prototypes for each query. Extensive experiments on two real-world cross-deployment benchmarks demonstrate consistent improvements over strong deep learning and meta-learning baselines, achieving more accurate and stable recognition under label-scarce target deployments.

Distributed Fiber Optic Sensing (DFOS) is promising for long-range perimeter security, yet practical deployment faces three key obstacles: severe cross-deployment domain shift, scarce or unavailable labels at new sites, and limited within-class coverage even in source deployments.

Multi-Objective Alignment aims to align Large Language Models (LLMs) with diverse and often conflicting human values by optimizing multiple objectives simultaneously. Existing methods predominantly rely on static preference weight construction strategies. However, rigidly aligning to fixed targets discards valuable intermediate information, as training responses inherently embody valid preference trade-offs even when deviating from the target. To address this limitation, we propose Meal, i.e., MEta ALigner, a bi-level meta-learning framework enabling bidirectional optimization between preferences and policy responses, generating instructive dynamic preferences for steadier training. Specifically, we introduce a preference-weight-net as a meta-learner to generate adaptive preference weights based on input prompts and update the preference weights as learnable parameters, while the LLM policy acts as a base-learner optimizing response generation conditioned on these preferences with rejection sampling strategy. Extensive empirical results demonstrate that our method achieves superior performance on several multi-objective benchmarks, validating the effectiveness of the dynamic bidirectional preference-policy optimization framework.

Multi-Objective Alignment aims to align Large Language Models (LLMs) with diverse and often conflicting human values by optimizing multiple objectives simultaneously.

Recent advances in vision language models (VLMs) offer reasoning capabilities, yet how these unfold and integrate visual and textual information remains unclear. We analyze reasoning dynamics in 18 VLMs covering instruction-tuned and reasoning-trained models from two different model families. We track confidence over Chain-of-Thought (CoT), measure the corrective effect of reasoning, and evaluate the contribution of intermediate reasoning steps. We find that models are prone to answer inertia, in which early commitments to a prediction are reinforced, rather than revised during reasoning steps. While reasoning-trained models show stronger corrective behavior, their gains depend on modality conditions, from text-dominant to vision-only settings. Using controlled interventions with misleading textual cues, we show that models are consistently influenced by these cues even when visual evidence is sufficient, and assess whether this influence is recoverable from CoT. Although this influence can appear in the CoT, its detectability varies across models and depends on what is being monitored. Reasoning-trained models are more likely to explicitly refer to the cues, but their longer and fluent CoTs can still appear visually grounded while actually following textual cues, obscuring modality reliance. In contrast, instruction-tuned models refer to the cues less explicitly, but their shorter traces reveal inconsistencies with the visual input. Taken together, these findings indicate that CoT provides only a partial view of how different modalities drive VLM decisions, with important implications for the transparency and safety of multimodal systems.

Recent advances in vision language models (VLMs) offer reasoning capabilities, yet how these unfold and integrate visual and textual information remains unclear.

Small instruct-tuned LLMs produce degenerate verbal confidence under minimal elicitation: ceiling rates above 95%, near-chance Type-2 AUROC, and Invalid validity profiles. We test whether confidence-conditioned supervised fine-tuning (CSFT) with self-consistency-derived targets can close the gap between internal information and verbal readout. A pre-registered Phase 0 protocol on Gemma 3 4B-it with a modal filter restricting training to items with correct modal answers produced a negative result: AUROC2 dropped from 0.554 to 0.509 due to label-entropy collapse in the training targets. An exploratory rescue removed the filter, training on all 2,000 calibration items. This produced a binary verbal correctness discriminator with AUROC2 = 0.774 on held-out TriviaQA, compressing a 10-sample self-consistency signal (AUROC2 = 0.999) into a single-pass readout exceeding logit entropy (0.701). The shuffled-target control showed no improvement (0.501). On MMLU, accuracy improved from 54.2% to 77.4% with the shuffled model at baseline (56.1%), supporting a target-dependent interpretation. The result is exploratory, binary rather than continuously calibrated, and observed at a single scale. It identifies two design lessons: confidence training requires label entropy, and correct targets regularise output format.

Small instruct-tuned LLMs produce degenerate verbal confidence under minimal elicitation: ceiling rates above 95%, near-chance Type-2 AUROC, and Invalid validity profiles.